Pre-registration of data for Mac terminals

This section describes how to pre-register your Mac device to use Mac Login.

Pre-registration for Mac devices

To use Mac login, you must register the information of the Mac device to be used from the web management console in advance. Please be sure to register this information in advance, as it will be needed later when setting up the client tools.

Pre-registration of data for Mac
[Administrator operation] Use the kitting batch registration function to pre-register the data necessary for logging in Mac.
Software Download
[Administrator operation] Download the software from the management console and deploy the installer to each PC.
Software Installations
[Administrator or General User Operation] Run the installer to install the software.
Client Tool Setup
[Administrator or General User Operation] Launch the client tool and perform setup. After the setup is completed, the next time you log in, you will be able to log in using your YubiKey.
Reflecting Group Policies
[Administrator operation] From the Service Settings screen of the Management Console, configure a group policy for device control and apply the rules.

Download CSV file for registration

From the menu on the left side of the screen, click the “Users” icon.

Click the “Kitting CSV registration” button on the right side of the Member management screen.

Click the “Download CSV sample file” button.

Save the file in any location.

CSV input

Open the downloaded “member_machine_registration_sample.csv”.
Below is a preview of the Excel file.

View in Excel

Enter registration information referring to the CSV file format below.
When the registration is complete, please save the file.

CSV batch registration

Login to the YubiOn Portal site.

Click the “Users” icon from the menu on the left side of the screen.

Click the “kitting CSV registration” button on the right side of the member management screen.

Click on “Choose File”.

Click on the “member_machine_registration_sample.csv” file and click the “Open” button.

Confirm that the values displayed in the registration list are correct and click the “Register” button.

  • Full-width character strings are not entered in half-width alphanumeric notation.
  • No unnecessary spaces, character strings, etc. are entered.
  • Email address format is correct.
  • Admin column* is populated with numbers.
    (*) If you are registered as an administrator, the administrator column will display a “check mark”.
    If you are registered as a general, the administrator column will be marked with a “-”.

Click the “OK” button on the registration completion message.
When the members listed in the CSV file are displayed in the member list, the batch registration is complete.

Go to Download mac login software.